How To Measure House For Siding [Explained]

Sep 5, 2022

We may earn money or products from the companies mentioned in this post.

Why measuring your house is important

When it comes to measuring your house for siding, it is important to get accurate measurements. This will ensure that the siding you purchase fits properly and looks great.

There are a few things you need to keep in mind in order to properly measure your house for siding.

First, you need to measure the width of your house. This is important because you need to know how much siding you will need to purchase. You also need to take into account the trim on your house when measuring the width.

Next, you need to measure the height of your house. This is important because you want to make sure that the siding is installed correctly and looks good from top to bottom.

Finally, you need to measure the length of your house. This measurement will help you determine how much siding you need to buy in total.

 

Tools you’ll need

When measuring your house for siding, you will need a few tools to get started.

  • A tape measure is the most important tool you’ll need, as it will be used to measure the length and width of your house.
  • A laser level is also necessary, as you’ll need to make sure the siding is installed level and plumb.
  • A chalk line can also be helpful in marking where you need to cut the siding.
  • Finally, a saw or siding snips will be needed to cut the siding to size.

 

Get a Tape Measure

Shop Laser Levels

Shop Siding Snips

 

Measuring the height of your house

There are a few different ways that you can measure the height of your house in order to get an accurate estimate for siding. The most common way is to use a measuring tape and measure from the ground to the eaves. Another way is to use a laser level, which will give you a more precise measurement.

If you’re using a measuring tape, start at the ground and measure up to the eaves. Make sure to hold the tape measure level, and don’t forget to account for any steps or other changes in elevation. Once you have your measurement, convert it to feet by dividing by 12.

If you’re using a laser level, set it up at ground level and aim it at the eaves of your house. The laser level will give you a reading in feet, which is your house’s height.

 

Measuring the width of your house

When measuring the width of your house, you will need to take into account the overhang of the roof. The overhang is the part of the roof that extends beyond the edge of the house.

To measure the width of your house, start at one end of the house and measure from the outermost edge of the wall to the outermost edge of the other wall. Include any eaves or other protrusions in your measurement.

 

Calculating square footage

While measuring your home for siding, you will need to take into account the total square footage of the exterior. To calculate this, you will need to measure all four sides of your home and then add these numbers together.

For example, if your home is 30 feet wide and 40 feet long, your total square footage would be 1,200 square feet. Keep in mind that this number will be larger if your home has any porches or other protrusions.

Then once you have the total square footage, measure any windows and doors and subtract their square foortage from the total to determine precisely how much siding you need…. Nobody wants to waste money, right?!

Once you have the final square footage, you can then determine how much siding you will need to purchase.

The amount of square footage that a pack of siding can cover will be printed on the label. You can use that number and the total square footage of the area needing to be sided to determine how many packs to purchase.

 

Example: Area needing to be sided: 1200 sqft / Pack of siding that covers 100 sqft = 12 packs of siding

 

Just remember you still need J-channels and corner caps as well.

 

 

Conclusion: How to Measure Your House for Siding

In order to get an accurate estimate of how much siding you need to purchase, you’ll need to properly measure your house for siding. This includes measuring all the sides of your house.

To do this, follow these steps:

1. Start at one end of your house and use a tape measure to measure the width.

2. Make a note of this measurement and then move to the other end of your house and measure the width again.

3. Take the average of these two measurements – this will be the width of your house.

4. Once you have the width, multiply it by the height of your house to get the total square footage.

5. This is the number you’ll need to use when estimating how much siding you need for your home improvement project.

 

Read Next: How Long Does it Take to Build a Modular Home? 

0 Comments

Submit a Comment

Your email address will not be published.

Categories